Product Name：
SUITIT SG222 Anaerobic Threadlocking Adhesives
Product Description：
SUITIT SG222 Anaerobic Threadlocking Adhesives is a low-strength detachableproduct. Its core advantages are easy disassembly and anti-loosening sealing. The purple thixotropic formula can cure when the metal contact surfaces are isolated from oxygen. It achieves initial positioning in 10 minutes and reaches full strength in 24 hours.
It is compatible with metal substrates such as steel, aluminum, and brass, especially suitable for small-sized threads ranging from M2 to M12. It can prevent loosening and leakage caused by vibration. It has a temperature resistance range of -55°C to 150°C. It can be disassembled with manual tools, making maintenance and adjustment convenient.
It is a single-component product that does not require mixing. The applied sealant does not flow. It is suitable for locating screws, precision instruments, and low-strength metal fasteners. It balances the reliability of fastening and the convenience of maintenance, making it an ideal solution for industrial assembly and equipment maintenance.
Product Details:
· Product Name:SUITIT SG222 Anaerobic Threadlocking Adhesives
· Chemical Type:Methacrylate
· Typical use:Removable Bolts, M2 to M12
· Color:Purple liquid
· Strength:Low intensity
· Viscosity (mPa.s):Thixotropy: 1200 - 5000
· Prevail torque（N.m）:4
· Break torque（N.m）:6
· Temperature:-52~150℃
· Fixture fime/full cure fime:20min/24h
· Container:50ml/250ml
· Shelf life:12 months
· Product features:Detachable, suitable for applications that require frequent disassembly
· Guide for Use:
Assembly
1. To achieve the best results, thoroughly clean the inner and outer surfaces of the material using a product such as SUITIT cleaner. Wait for the surfaces to dry before proceeding to the next step.
2. If the material is a non-reactive metal or has a slow curing speed, spray a promoter on the mating surface and let it dry for 30 seconds.
3. Shake this product thoroughly before use.
4. To prevent the product from blocking the nozzle, do not allow the dispensing tip to touch the metal surface when using.
5. For through holes, apply glue at the mating part of the bolt and nut.
6. For blind holes, drip glue at the bottom of the blind hole. During assembly, the internal air will be expelled.
7. Assemble the bolts according to normal procedures and tighten them to the required torque.
8. For sealing applications, apply the product to the external thread (360°) and do not apply it to the first thread. Fill the entire thread gap with the adhesive. For larger threads and gaps, you can adjust the amount of adhesive and apply the product to the internal thread as well.
Disassembly
1. Use standard manual tools for disassembly.
2. In rare cases, due to the long length of the bolts, manual tools cannot be used for disassembly. You can locally heat the bolt and nut to 250°C and perform disassembly while they are hot.
Cleaning
For the solidified glue, it can be soaked in the solvent and then mechanically ground using tools such as steel brushes.
