SUITIT SG263 Anaerobic Threadlocking Adhesives

Product Name：

SUITIT SG263 Anaerobic Threadlocking Adhesives

Product Description：

SUITIT SG263 Anaerobic Threadlocking Adhesives is a high-strength, permanent product. Its core advantages include oil resistance, high temperature resistance, and strong locking force. It comes in a single-component red formulation. When applied to metal threads and sealed in an airtight environment, it cures within 10 minutes. It reaches full strength in 24 hours. The adhesive does not run.

It is suitable for metal substrates such as steel, stainless steel, and aluminum alloy. It is compatible with inert and coated surfaces. It can withstand minor oil contamination and supports thread specifications up to M25. The temperature range is -54°C to 180°C. It prevents vibration loosening and rust leakage. It requires heating for removal.

The application is convenient as no mixing is required. It is widely used in motor assembly, pump and valve fixation, heavy machinery and engine components. It is a reliable locking and sealing solution for heavy-duty scenarios.

Product Details:

· Product Name:SUITIT SG263 Anaerobic Threadlocking Adhesives

· Chemical Type:Methacrylate

· Typical use:Metric Bolts M25 and Smaller

· Color:Red liquid

· Strength:High intensity

· Viscosity (mPa.s):400-600

· Prevail torque（N.m）:22

· Break torque（N.m）:22

· Temperature:-54~180℃

· Fixture fime/full cure fime:10min/24h

· Container:50ml/250ml

· Shelf life:12 months

· Product features:Has high oil and temperature resistance.Can with stand a small amount of industrial oil stains, suitable for inert metal surfaces

· Guide for Use:

Assembly

1. To achieve the best results, thoroughly clean the inner and outer surfaces of the material using a product such as SUITIT cleaner. Wait for the surfaces to dry before proceeding to the next step.

2. If the material is a non-reactive metal or has a slow curing speed, spray a promoter on the mating surface and let it dry for 30 seconds.

3. Shake this product thoroughly before use.

4. To prevent the product from blocking the nozzle, do not allow the dispensing tip to touch the metal surface when using.

5. For through holes, apply glue at the mating part of the bolt and nut.

6. For blind holes, drip glue at the bottom of the blind hole. During assembly, the internal air will be expelled.

7. Assemble the bolts according to normal procedures and tighten them to the required torque.

8. For sealing applications, apply the product to the external thread (360°) and do not apply it to the first thread. Fill the entire thread gap with the adhesive. For larger threads and gaps, you can adjust the amount of adhesive and apply the product to the internal thread as well.

Disassembly

1. Use standard manual tools for disassembly.

2. In rare cases, due to the long length of the bolts, manual tools cannot be used for disassembly. You can locally heat the bolt and nut to 250°C and perform disassembly while they are hot.

Cleaning

For the solidified glue, it can be soaked in the solvent and then mechanically ground using tools such as steel brushes.