Industrial Adhesives
Your Trusted OEM/ODM Partner for Certified, High-Performance Industrial Adhesives.
SG4010
Ultra-low viscosity moisture curing glue for tiny parts, uniform stress distribution
Specially developed for rapid assembly of miniature small components. Works for most metals, plastics and elastomers, widely applied in precision electronics, miniature hardware and small consumer part bonding procedures.
Ultra clear
Color
5–15
Viscosity(mPa⋅s)
-
Temperature(℃)
Description
SUITIT SG4010 is single-component ethyl cyanoacrylate instant adhesive with ultra-low viscosity. It is clear pale straw liquid cured by surface moisture, designed for tiny substrates, evenly disperses joint stress and delivers reliable high tensile & shear bonding strength after full curing within 24–72 hours.
Features
- Ultra-low viscosity ideal for micro and tiny workpiece bonding
- Uniform stress distribution on bonded joints
- Powerful tensile and shear bonding performance
- Universal adhesion to metals, plastics and elastomers
- Matched primer & accelerator available for hard-to-bond surfaces
- Small volume packaging fits precision automated dispensing
Specification
Pre-Curing Properties
- Chemical Base: Ethyl Cyanoacrylate
- Appearance: Colorless transparent to pale straw liquid
- Viscosity (25°C): 5–15 mPa·s, typical value 9.43
- Aged Viscosity (80°C/72h): 6–18 mPa·s, typical value 13.39
- Curing Mode: Moisture curing
Cured Mechanical Strength (24h full cure)
- Peak Load: ≥2 KN, typical value 2.71 KN
- Stainless Steel Shear Strength: >4 MPa, typical value 4.41 MPa
Storage & Packaging
- Storage Condition: Sealed frozen dry environment at -20°C
- Shelf Life: 12 months
- Standard Sizes: 10ml tube, 30ml tube, 50ml tube
Download
Similar Application
Clear Filters
Instant Bonding
Slightly thixotropic PU modified UV adhesive cures fast under UV/visible light
Instant Bonding
Toughened two-part cyanoacrylate-epoxy glue with max 5mm gap filling, high heat
