Industrial Adhesives
Your Trusted OEM/ODM Partner for Certified, High-Performance Industrial Adhesives.
SG401HV
High-viscosity moisture-activated instant glue
Fast bonding for metals (steel, aluminum), elastomers (nitrile/neoprene rubber), plastics (ABS, PVC, PC, phenolic resin). Ideal for porous materials including wood, cardboard, leather, textiles and paper, widely used in hardware, electronics and daily consumer goods assembly.
Ultra clear
Color
350-450
Viscosity(mPa⋅s)
-40-80
Temperature(℃)
Description
SUITIT SG401HV is a single-component ethyl cyanoacrylate instant adhesive cured by surface moisture. It is a clear pale straw low-viscosity liquid, evenly distributes bonding stress and delivers strong mechanical strength. Full solvent & chemical resistance is achieved after 24 hours full curing.
Features
- Single-component formula, no mixing required for simple operation
- Super fast fixture within 4 seconds for most metal substrates
- Outstanding tensile and shear bonding performance
- Excellent adhesion to porous absorbent substrates
- Cure speed adjustable via matching accelerator for wide gaps
Specification
Basic Raw Properties
- Chemical Type: Ethyl Cyanoacrylate
- Appearance: Colorless transparent to pale straw liquid
- Viscosity (25°C): 70–120 mPa.s (Low viscosity)
- Density (25°C): 1.1
- Curing Mechanism: Moisture curing
Fixture Time (22°C, 50% RH)
- Steel, Aluminum: <4s
- Rubber, ABS, PVC, Paper, Cardboard, Balsa Wood: <5s
- Polycarbonate: 5–10s | Fabric: 10–20s
- Pine Wood:15–20s | Oak & Leather:15–30s
Mechanical Strength (22°C, fully cured 24h–1 week)
- Sandblasted steel shear strength: 11 N/mm²
- Standard tensile strength: ≥13.7 N/mm²
- Polycarbonate shear strength: 11 N/mm²
Operation & Storage
- Full load bearing: 24–72 hours post bonding
- Storage: Sealed dry environment at 2°C–8°C
- Supporting accessories: Cleaner, primer, accelerator available for difficult bonding surfaces
Download
Similar Application
Clear Filters
Instant Bonding
Slightly thixotropic PU modified UV adhesive cures fast under UV/visible light
Instant Bonding
Toughened two-part cyanoacrylate-epoxy glue with max 5mm gap filling, high heat
