Product Name：
SUITIT SG406 Instant Adhesive
Product Description：
SUITIT SG406 Instant Adhesive is a surface-insensitive low-viscosity product, featuring rapid curing and wide adaptability. It starts curing upon exposure to air moisture. Most substrates achieve initial curing within seconds, reaching maximum strength within 24 hours, forming an ultra-thin and dense adhesive layer.
It is compatible with various materials such as metals, plastics, rubber (including EPDM), and wood. It can bond porous and acidic materials. When used with a primer, it can overcome the adhesion issues of difficult-to-bond substrates like PP and PE. It has a temperature range of -52°C to 120°C, with high bonding strength and excellent anti-aging properties.
The application is convenient, allowing for manual or automated application. It is widely used in industrial assembly, electronic fixation, automotive repair, and DIY scenarios, serving as an efficient and reliable bonding solution.
Product Details:
· Product Name: SUITIT SG406 Instant Adhesive
· Chemical Type: Ethyl Cyanoacrylate
· Color: Colorless and transparent to a pale straw color liquid
· Specification:20g
· Viscosity: Low
· Viscosity (mPa.s): 20
· Gap fill (mm): 0.05
· Temperature: -52~120℃
· Fixture fime/full cure fime:<5s（Aluminum）/24h
· Strength:Low
· Usage:Air dry
· Shelf life:12 months
· Features:
o Fast Drying
o Long-lasting
o Strong adhesion
o Easy to use
· Guide for Use:
1. The bonding area should be clean and free of grease. Clean it with SUITIT cleaning agent and let all surfaces dry.
2. To enhance the bonding effect on low surface energy substrates, you can use SUITIT primer. When using, avoid applying too much and wait for it to dry.
3. If necessary, you can use SUITIT accelerator. When using, apply it on one side of the substrate (do not apply it on the side with the primer) and wait for it to dry.
4. Apply the adhesive on the other side of the bonded area (do not apply it on the surface of the accelerator). Do not use thin paper or a brush to apply the adhesive. Assemble the components quickly. The components should be accurately positioned and quickly fixed. Do not make excessive adjustments.
5. The accelerator of SUITIT can help cure the excess product outside the bonding area. Spray or drip the accelerator onto the overflow area.
6. The bonding area should be fixed or clamped until the adhesive is preliminarily cured.
7. After the bonding parts reach complete strength, they can withstand the load (due to the gap in the adhesive layer and the different materials being bonded, the typical complete curing time of this adhesive is between 24 and 72 hours).
